kernel::bsp::device_driver::bcm::bcm2xxx_pl011_uart::CR

Module UARTEN

Source
Expand description

UART enable:

0 = UART is disabled. If the UART is disabled in the middle of transmission or reception, it completes the current character before stopping.

1 = The UART is enabled. Data transmission and reception occurs for either UART signals or SIR signals depending on the setting of the SIREN bit

Enums§

Constants§

  • CLEAR
  • Disabled
    If the UART is disabled in the middle of transmission or reception, it completes the current character before stopping.
  • Enabled
  • SET